Write the process of address and data separation in DE-multiplexed address/data bus in 8085 microprocessor.

Question

yunisha nepal · Accepted Answer

The DE-multiplexed address/data bus in the 8085 microprocessor separates the address and data signals for efficient transfer of information between the processor and its peripheral devices. The following is the process of address and data separation:The 8085 microprocessor sends the address and data on the same bus, using the same set of lines.A device called the address latch is used to separate the address from the data.The address latch is triggered by a control signal called ALE (Address Latch Enable) which is generated by the 8085.When ALE goes high, the address latch latches the address onto a separate set of lines and holds it there until the next ALE pulse.After the address is latched, the 8085 sends the data on the bus.The peripheral device that is addressed by the latched address, reads the data and performs the required operation.The address and data signals are multiplexed again for the next cycle, and the process repeats.The DE-multiplexed address/data bus allows the 8085 to send both address and data signals in a single cycle, thus increasing the efficiency and speed of the data transfer.

Write the process of address and data separation in DE-multiplexed address/data bus in 8085 microprocessor.

Leave your Answer:

Hits Counter

Question

Write the process of address and data separation in DE-multiplexed address/data bus in 8085 microprocessor.

Leave your Answer: